Category Archives: ferric chloride

Three Ways to Etch Snazzy Brass Nameplates

It’s the little touches that make a project, and a nice nameplate can really tie a retro build together. Such badges are easy enough to make with a CNC machine, but if you don’t have access to machine tools you can put chemistry to work for you with these acid-etched brass nameplates.

The etching method that [Switch and Lever] uses to get down to brass plaques will be intimately familiar to anyone who has etched a PCB before. Ferric chloride works as well on brass as it does on copper, and [Switch and Lever] does a good job explaining the …read more

Continue reading

Posted in etchant, etching, ferric chloride, laser, mask, nameplate, paint, plaque | Leave a comment

Heavily Hacked Printer for DIY PCBs

Sometimes we get tips that only leave us guessing as to how — and sometimes why — a project was built. Such is the case with this PCB printer; in this case, the build specifics are the only thing in question, because it puts out some pretty impressive PCBs.

All we have to go on is the video after the break, which despite an exhaustive minutes-long search appears to be the only documentation [Androkavo] did for this build. The captions tell us that the printer is built around the guts from an Epson Stylus Photo 1390 printer. There’s no evidence …read more

Continue reading

Posted in etching, ferric chloride, ink jet, misc hacks, parts, pcb, printer, resist, transfer | Leave a comment

Cheap and Easy Magnetic DNA Separation Method Needs Your Help

When you consider that almost every single cell in your body has more than a meter of DNA coiled up inside its nucleus, it seems like it should be pretty easy to get some to study. But with all the other cellular gunk in a crude preparation, DNA can be quite hard to isolate. That’s where this cheap and easy magnetic DNA separation method comes in. If it can be optimized and tested with some help from the citizen science community.

Commercial DNA separation methods generally involve mixing silica beads into crude cell fractions; the DNA preferentially binds to the …read more

Continue reading

Posted in ferric chloride, ferrous sulfate, magnetite, magnets, silca, waterglass | Leave a comment

From Zero to Nano

Have you ever wanted to build your own Arduino from scratch? [Pratik Makwana] shares the entire process of designing, building and flashing an Arduino Nano clone. This is not an entry-level project and requires some knowledge of soldering to succeed with such small components, but it is highly rewarding to make. Although it’s a cheap build, it’s probably cheaper to just buy a Nano. That’s not the point.

The goal here and the interesting part of the project is that you can follow the entire process of making the board. You can use the knowledge to design your own board, …read more

Continue reading

Posted in etch, fabrication, ferric chloride, pcb, smd, surface mount | Leave a comment