Category Archives: ikea

Hackaday Links: The Eleventh Day Of The Eleventh Month, 2018

For the better part of the last five years, the Great War Channel on YouTube has been covering the events of the Great War, week by week, exactly 100 years later. It’s hundreds of episodes designed for history buffs, and quite literally one of the most educational channels on YouTube. It’s the eleventh day of the eleventh month of the eighteenth year, which means the folks behind the Great War Channel are probably taking a well-deserved vacation. If you haven’t heard of this channel, it might be a good time to check it out.

Ikea is now selling NFC locks. …read more

Continue reading

Posted in Great War, Hackaday Columns, Hackaday links, ikea, McRib, WWI | Leave a comment

Turning That Old Hoverboard Into A Learning Platform

[Isabelle Simova] is building Hoverbot, a flexible robotics platform using Ikea plastic trays, JavaScript running on a Raspberry Pi and parts scavenged from commonly available hoverboards.

Self-balancing scooters a.k.a. Hoverboards are a great source of parts for such a project. Their high torque, direct drive brushless motors can drive loads of 100 kg or more. In addition, you also get a matching motor controller board, a rechargeable battery and its charging circuit. Most hoverboard controllers use the STM32F103, so flashing them with your own firmware becomes easy using a ST-link V2 programmer.

The next set of parts you need to …read more

Continue reading

Posted in hoverboard, ikea, javascript, node, node.js, NPM, Raspberry Pi, robot, robots hacks, Self-balancing scooters, STM32F103, Teleoperation, The Hackaday Prize, ultrasonic sensor, ultrasonic transducer | Leave a comment

Ikea Tradfri Hacking

Smart lighting is all the rage right now. Sure, Phillips Hue is the giant player in the market, but there are plenty of ZigBee, Bluetooth, and WiFi light bulbs out there. Ikea–known for cheap furniture, meatballs, and waffles–is a recent addition to the field with their Tradfri system. Like most things from Ikea, they are effective and inexpensive. [Andreas] takes a Dremel to the controller and shows how to hack the system to use MQTT. You can check out the video below.

Once he had the device opened, the used the German Make magazine article we talked about earlier, to …read more

Continue reading

Posted in home automation, home hacks, ikea, IoT, mqtt, tradfri | Leave a comment

Hackaday Prize Entry: Modular Rail Lighting

When operating any kind of hydroponic farming, there are a number of lighting solutions — few of them inexpensive. Originally looking for an alternative to the lighting of IKEA’s expensive hydroponics system, [Professor Fartsparkle] and their colleague prototyped a rail system that allows clip-on LED boards for variable lighting options.

Taking inspiration from wire and track lighting systems, the key was the 5mm fuse holders mounted on the bottom of the LED boards. Snipping off their stopping clip makes them easy to install and remove from the mounting rails. The rails themselves double as power conduits for the LED boards, …read more

Continue reading

Posted in hydroponics, ikea, led hacks, lighting, modular, rail, The Hackaday Prize | Leave a comment

Adding an IKEA Wireless Charger to a Project

IKEA sometimes seems like a DIY store disguised as a furniture store. We may go there looking for a new sofa or kitchen table, but, to the DIY enthusiast, it’s a shop full of possibilities. While wandering through the local IKEA, [Erich Styger] noticed they had some Qi wireless chargers and receivers for a very reasonable price, so he bought a few and added wireless charging to his Mikroelektronika Hexiwear.

[Erich Styger] didn’t like the clumsiness of the Hexiwear’s USB charging options and, at the price he got the IKEA Vitahult Qi phone case wireless receivers at, he couldn’t resist …read more

Continue reading

Posted in ikea, QI, wireless charging hack, wireless hacks | Leave a comment

IKEA Table 3D Printer

In this Instructable, [Wayne Mason-Drust] shares the step by step guide on how to make a cool, good-looking, 3D printer based on the Ikea LACK table. From an Ikea lantern weather station to a fully printed CNC based on an Ikea table, it’s almost safe to say that a 3D printer Ikea hack was overdue.

The idea to use a Ikea table as a base for a 3D printer first came to [Wayne] as he used this table to support other 3D printer he had working in his business. He realized that, even after five years of use, the table …read more

Continue reading

Posted in ikea, ikeahack, printtable | Leave a comment

Ikea Desk Lamp That Will Defend Your Lungs

While some people may enjoy the occasional whiff of noxious smells — gasoline, axe body spray, etc — prolonged exposure to fumes is not good for your health. This goes for soldering too, isn’t it about time you added some abatement to your bench tools?

Inspired by some of the fume hoods we’ve featured before — take note, ye who art lacking projects — [Georg Sluyterman] put together his own Ikea lamp fume extractor.

The most striking feature is that it’s mounted on an Ikea desk lamp making for convenient positioning and minimal clutter. A NeoPixels strip lights …read more

Continue reading

Posted in hood, ikea, lamp, motion, sensor, soldering, tool hacks | Leave a comment